Sold out
FC-PVS14 1800+ FOM White Phosphor (Monocular Only)

Serial-matched inventory
Available Units
Falconclaw PVS-14
A real PVS-14, monocular only
True analog night vision on an NNVT 1800+ FOM white phosphor tube. No mounts in the box - pick this if you already run your own J-arm and helmet mount.
What you are actually getting
A genuine tube, no fluff
A true image-intensifier PVS-14, not a digital lookalike. White phosphor, autogated, and speced to the lowest FOM that still makes sense on a single tube. Just the monocular - bring your own mount.
True analog PVS-14
A real image-intensifier tube, not a digital screen. The PVS-14 is the standard the whole night-vision world is built around. Autogated, so the tube protects itself in sudden bright light.
1800 FOM, why the minimum for a mono
On a monocular your brain only has one tube to work with - it cannot fuse a left and right image the way it does on a binocular. So a single tube needs more figure of merit to read sharp. 1800 is the floor we recommend for a mono.
Built-in IR illuminator
An onboard infrared light for pitch-black rooms and caves where there is no starlight at all. Honest note: it lights you up to anyone else wearing night vision, so keep it for true zero-light only.
About 50 hours on one AA
Runs around 50 hours on a single AA cell. Use a non-rechargeable lithium or alkaline AA - they hold voltage longer in the cold than rechargeables.
Made in Estonia
Genuine analog, monocular only
Every Falconclaw PVS-14 is built on a genuine NNVT 1800+ FOM white phosphor image intensifier and assembled in Estonia. Monocular only, so you pay for the tube, not a kit you already own - keep your own J-arm and helmet mount.
The numbers
Product Specs
Build your kit
Compatibility
Wear the PVS-14 on its own with a J-arm and helmet mount, or layer a thermal overlay on top.
Build it as a kit and the add-ons come off automatically: -20% on every mount, bridge and adapter, -10% on a second optic. Applied in your cart, no code.
A PVS-14 needs a J-arm to drop to eye level on a helmet mount. Run it solo, or add the FTO 640 thermal overlay to fuse heat onto the night-vision image. Pick a path below, or confirm you already own the parts.
STANDALONE
Your STANDALONE build
Parts you need to add
A single PVS-14 on the helmet via a J-arm. The baseline loadout, passive, lightweight, one tube.
THERMAL OVERLAY - COTI
Your THERMAL OVERLAY - COTI build
Parts you need to add
Clip the FTO 640 thermal overlay onto the PVS-14 to fuse heat detection onto your night-vision image. Spot warm targets the tube alone misses.
Every order
What's in the Box
- FC-PVS-14 Monocular factory collimated
- Hard case
- Rubber eyecup
- Daycap cover
- Tube specification sheet
- Device birth certificate
- Falconclaw user manual
Export control
Shipping & Export
not sure if it fits your setup?
Talk to an actual operator before you buy.
Kai answers first. A real operator steps in when needed.









